Air Cooled Chiller Production İstanbul

Air Cooled Scroll or Semi Hermetic Piston Compressor chiller

FERRO Chillers FRA series Air Cooled water cooler groups are produced in different cooling capacity ranges between 8 kW  – 500 kW cooling capacities.

FERRO CHILLERS FRA series Air Cooled water cooler groups are designed to operate in outdoor conditions and appliances producing cold water for air conditioning and industrial purposes.

1 – BODY
Consists of specially shaped, robust and durable profiles and body covers. It is coated with electrostatic powder paint on galvanized sheet. Resistant to scratches and impacts. The appliance can be easily serviced by opening and closing the covers on the body.

2 – COMPRESSOR
Highly efficient scroll or semi hermetic pison compressors are used.  Based on the capacity, there are 1 or 2 compressors used, which can be 8 maximum.  The compressor is equipped with crankcase heater, discharge and suction valves and motor protection thermic against overheating.

3 – EVAPORATOR
Direct expansion shell & tube type.  Body is insulated against corrosion and heat.  Copper pipes are mechanically inflated and consist of a tube nest in order to remove and clean easily.  Manufactured in one or two circuits. The water inlet and outlet pipes are galvanized and extended to the outside of the body.

4 – CONDENSER
Consists of aluminum wing-copper pipe or microchannel aluminium. Condensers with subcooling circuits are installed after testing under 40 bar pressure.

5 – CONDENSER FANS
Self-powered axial fans are used.  Wings with aerodynamic form enable the fans operate efficiently and quietly.

6 – COOLING CIRCUIT
Consists of 1 or 2 independent circuits.  On each circuit, protection equipment such as solenoid valve, expansion valve, drying filter, sight glass, low-high pressure switches, charging valves, liquid storage valves, etc.  Vibration Absorbers are used on the compressor discharge and suction pipes. For proper water flow, differential pressure flow switch is installed as standard and winter kit (pressure switch fan control) is installed as an option.

7 – ELECTRICAL AND AUTOMATION PANEL
Electrical panel is designed to be under protection against outdoor conditions.  By using easily accessible double covers, full protection is maintained. Equipped with digital or microprocessor control.

Air Cooled Screw compressor chiller

FERRO Chiller modular screw compressor air-cooled water cooler groups are produced in capacities ranging between 100 – 1.500 kW / module.
Reached capacity is 1.500 kW. It is possible to implement additional modules.  Thanks to independent operation capability of the modules, the system can keep running in case of a failure.

They are designed to operate in outdoor conditions and used for cold water requirement needed in air conditioning units (Fan Coil, air conditioning plant, etc.) and industrial facilities.